Articles in this section

See more

Cleaning a SMART Board

In this article

     

    To clean the screen you will need two lint-free cloths and a spray bottle with 70-90% isopropyl alcohol. Follow these steps:

    1. Turn the display off by pressing the power button, located near the bottom right corner of the display.
    2. Wipe all surfaces with a dry lint-free cloth to remove dust and debris.
    3. Gently spray a small amount of cleaning solution on the second cloth.
      Note: Do not oversaturate the cloth to the point it is dripping.
    4. Wipe the screen with the dampened cloth.
    5. After wiping the screen, wipe off the remaining touch surfaces such as the frame, pens, and other accessories.

    Recommended supplies:

    Microfiber cloth: https://www.amazon.com/AmazonBasics-CW190423-24-Pack-Microfiber-Cleaning/dp/B009FUF6DM

    Cleaning solution: https://www.amazon.com/MG-Chemicals-Isopropyl-Alcohol-Electronics/dp/B004SPJP5O/ref=sr_1_2?crid=2EXVNQN3FE94V&keywords=iso-propyl+alcohol+spray&qid=1662132990&sprefix=iso-propyl+alcohol+spray%2Caps%2C74&sr=8-2

    Note: Do not clean the screen using cleaning solutions or glass cleaners that are not approved by SMART. Non-approved cleansers can cause deterioration or discoloration of the screen.